9P Suction&Discharge series Fluid End Module for Mud Pump
Basic Info
Model No.: F/FB/PAH/T1300/9P suction&discharge module
Product Description
Specifications 1. Rated for all drilling operations
2. Maximum operating temperature is 180 aa (-40 aa-- 82 aa)
3. High pressure Mud Pump
F/FB series Fluid End Module for Mud Pump Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one-and/or-two-piece configuration, with designs available for pressure of 5000psi(35.1Mpa), 7500psi(52.7Mpa), and 10000psi(70.3Mpa); discharge connections available on each side; suction connections on each side or front center. Material is 35CrMoA or 40CrMoNn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoridation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of JB/TQ252-81, and should be checked by gradeⅢ After quenching the rough module will be rough processed, then the hull hardness is HB285-330. Mechanical property: σb ≥850MPa, σs≥670MPa, δ≥5%,ψ≥30%. The two1:6(1:12) taper hole rolling treatments are checked by ring gage. Its contact area has continuous distribution on the circumference. The contact area is not less than 75% .The line of intersection of all cylindrical surface of the hull are facetted obtuse angle by hand or grinding wheel ,forming a circumference R≥8.Test pressure is 49Mpa, keep pressure 1 hour, pressure can not be reduced. Finished products have crack detection report. Detailed Product Description
Triplex Fluid End Modules: F/FB/PAH/T1300/9P SUCTION & DISCHARGE MODULE
Our high strength forged triplex fluid end modules, are made from 4130 or 4135 metal and heat treated to a hardness for long wear. The clean exterior finish reflects the superior inside quality.
We furnish all associated items with the modules:
Valve and cylinder head plugs
Valve cylinder head threaded rings
Valve cylinder head locks
Studs and nuts
Duplex Fluid Ends:
Our principal also maufactuers duplex fluid end modules to API standards We manufacture Mud Pump Fluid End Module for the pumps below and much more!
Welcome to make friends and business negotiation. If you have any need or question please feel free to contact me. Contact us if you need more details on Fluid End Module for Mud Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Suction and Discharge Pump、Valve Box for Mud Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.
2. Maximum operating temperature is 180 aa (-40 aa-- 82 aa)
3. High pressure Mud Pump
F/FB series Fluid End Module for Mud Pump Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one-and/or-two-piece configuration, with designs available for pressure of 5000psi(35.1Mpa), 7500psi(52.7Mpa), and 10000psi(70.3Mpa); discharge connections available on each side; suction connections on each side or front center. Material is 35CrMoA or 40CrMoNn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoridation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of JB/TQ252-81, and should be checked by gradeⅢ After quenching the rough module will be rough processed, then the hull hardness is HB285-330. Mechanical property: σb ≥850MPa, σs≥670MPa, δ≥5%,ψ≥30%. The two1:6(1:12) taper hole rolling treatments are checked by ring gage. Its contact area has continuous distribution on the circumference. The contact area is not less than 75% .The line of intersection of all cylindrical surface of the hull are facetted obtuse angle by hand or grinding wheel ,forming a circumference R≥8.Test pressure is 49Mpa, keep pressure 1 hour, pressure can not be reduced. Finished products have crack detection report. Detailed Product Description
Triplex Fluid End Modules: F/FB/PAH/T1300/9P SUCTION & DISCHARGE MODULE
Our high strength forged triplex fluid end modules, are made from 4130 or 4135 metal and heat treated to a hardness for long wear. The clean exterior finish reflects the superior inside quality.
We furnish all associated items with the modules:
Valve and cylinder head plugs
Valve cylinder head threaded rings
Valve cylinder head locks
Studs and nuts
Duplex Fluid Ends:
Our principal also maufactuers duplex fluid end modules to API standards We manufacture Mud Pump Fluid End Module for the pumps below and much more!
BRAND | MODEL | ||||||
EMSCO | F-350 | F-500 | F-650 | F-800 | F1000 | FA-1300 | FB-1300 |
FA-1600 | FB-1600 | ||||||
Gardner Denver | PZ-7 | PZ-8 | PZ-9 | PZ-10 | PZ-11 | ||
National | 7-P-50 | 8-P-80 | 9-P-100 | 10-P-130 | 12-P-160 | ||
IDECO | T-500 | T-800 | T-1000 | T-1300 | T-1600 | ||
Oilwell | A-350-PT | A-560-PT | A-650-PT | A-850-PT | A-1100-PT | A-1400-PT | A-1700-PT |
China | 3NB-350 | 3NB-500 | 3NB-800 | 3NB-1000 | 3NB-1300 | 3NB-1600 | 3NB-2200 |
Product Categories : Fluid End Module
Premium Related Products
Other Products
Hot Products
Trailer Mounted Pump (2&4 wheels trailer)High Pressure Slurry Pump for Mine ApplicationDiesel Engine Driven Self Priming Sludge Mud PumpHorizontal Double Suction Split Case PumpQj (SJ) Submersible Deep Well PumpDiesel Engine and Electric Self Priming Sewage Centrifugal Water PumpMud pump cylinder linerAPI Certificated triplex reciprocating mud pump3NB Series Triplex Mud PumpF Series Triplex Mud PumpPiston Rodsfluid end (valve box) bolts and nutshigh quality drilling equipment part mud pump linermud pump valve bodyUrethane Piston assembly for Mud Pumpfactory supply High Quality Pump Liner